Tag: engine

Categories
24 Hours of Lemons cars

Car Preparation – Day 2

Day 2 of preparation was all about fixing up the head. As you can see below the valves were in really bad shape and all of them had to be replaced. We cleaned the head and the block before putting on a new head gasket kit.

A very bent valve
Cleaning the underside of the head before putting it back on

The manifolds were bolted back onto the head and we put the head back onto the car. At this point we were feeling quite optimistic about getting the car done when we realized that we didn’t have the right tool to tighten the head bolts – seeing that it was already late we called it quits for day 2 with the head just sitting on the block.… Read the rest

Categories
24 Hours of Lemons cars

Car Preparation – Day 1

Now that we had the car at Dietsch Werks, we had to figure out what was wrong with. Day 1 would be all about stripping the car under Robs guidance. We started out by jacking it up and draining the coolant.

The next step was to remove the cylinder head. This was needed because the 325 is an interference engine and the broken timing belt guarantees that we have belt some valves. We disconnected all the hoses + wiring and used a forklift to lift the head out of the engine bay.

Lifting the head

Once we pulled the head off we made a surprising discovery – all the pistons had valve marks on them.… Read the rest